CleanPro+ Floor Polish H24 5 Litres Case of 2

CleanPro Plus Floor Polish contains amongst other ingredients: Preservative (2-Bromo-2-Nitropropane-1,3-Diol)

Manufacturers Address

Booker, NN8 1LT, UK. & Makro, Belfast, BT17 9NS, NI.

Return To

Advice Line 0345 602 6002

Storage

Store in a cool, dry place in original container. Keep container tightly closed.

Usage

Directions for Use A hard wearing floor polish suitable for use on most hard floor types including vinyl, rubber, linoleum, terrazzo and sealed surfaces. This product is only intended for use on floors which have been fully stripped of all previous polish, and should not be used on top of old polish. Dilution: Clean Pro Plus Floor Polish is a ready to use product. Application: For best results, prepare floor thoroughly. If necessary, remove old and worn polish using floor polish stripper. Clean and dry the floor thoroughly before sweeping to eliminate all loose particles. Pour the polish into a clean bucket or tray. Using a clean mop or applicator, spread the polish thinly onto the floor in straight lines. Leave to dry for at least 30 minutes. Once dry, apply a second coat of floor polish in straight lines at right angles to the direction used for the first application. To avoid build-up, leave a gap of approx. 10cm at the floor edge. For heavy traffic areas, a third coat may be applied. When dry, the floor may be buffed to a shine if required, using a suitable pad on a machine. Coverage: 1 litre of product will cover approximately 50 square metres, but this will vary depending on the nature of the surface to which the polish is applied.